|
SCOPE OF ACCREDITATION | Valid to: May 31, 2015
Certificate Number: 0560.01
In recognition of the successful completion of the A2LA evaluation process, accreditation has been granted to TouchStone Systems & Services, Inc. to perform tests on the following product lines:
Aircraft Components | Automotive Components | Coatings | Paint Finishes | Furniture | Textiles | Gaskets | Seals & Packings | Pipes | Hoses | Valves & Fittings | Wood & Wood Products | Military Replacement Parts | Fuel System Components | Component Qualifications Programs | Telecommunication | Bellcore | Medical Components & Products
For additional and more specific information, Click on a tab below.
ENVIRONMENTAL SIMULATION TESTING
TEST |
TEST METHOD |
High/Low Temp |
RTCA-DO-160 C/D/E/F; MIL-STD-202 F, MIL-STD-810 C/D/E/F/G; SAE J1211; IEC 68-2-2, IEC 60068-2-2, IEC 61215; BELLCORE: GR-49, GR-63, GR-282,
GR-468, GR-487, GR-489, GR-1221; ASNI-UL 1703; GM9132P; GMW 3172; PF9688;
FORD 00.00EA-D11-1; DC-10611 |
| Temp/Humidity |
RTCA-DO-160 C/D/E/F; MIL-STD-202 F,
MIL-STD-810 C/D/E/F/G; SAE J1211;
BELLCORE: GR-49, GR-63, GR-468, GR-487,
GR-1209, GR-2882; ASTM E1171; IEC 60068-2-38, IEC 61646; ASNI-UL 1703; GM9132P; GMW 3172; PF9688; FORD 00.00EA-D11-1; DC-10611 |
| IR Surface Temp/Solar |
MITSUBISHI ESX60210 4.3; NISSAN NES MO 131; BELLCORE: GR-487; EN60068-2-5, EN60068-2-9; MIL-STD-810 C/D/E/F/G |
| Thermal Shock |
MIL-STD-202 F, MIL-STD-810 C/D/E/F/G; BELLCORE: GR-63, GR-487, GR-1221; NISSAN NES M 000; GM9132P; GMW 3172; PF9688; FORD 00.00EA-D11-1; DC-10611 |
| Temp/Humidity Cycling |
GM9505P except cycle J; GMW 14124 except cycle J; BELLCORE: GR-49, GR-1221, NISSAN, NES M 000 |
| Humidity/Fogging |
GM4465P, GM4350M; ASTM: D2247, D1735; HES D2016-99A, HES D6501-03, HES D2021; ASTM D1735 |
| Condensing Humidity (QUV Cabinet) |
ASTM: D4585; CMT 0033 |
| Salt Spray/Acetic Acid/Salt/Combined Thermal |
ASTM: B117, G85, B537, D610, D714; GM4298P, GM4476P, GM9540P, GM4350M; RTCA-DO-160 C/D/E/F; MIL-STD-202 F, MIL-STD-810 C/D/E/F/G; SAE J1211; BELLCORE GR-282; PARKHAN P21-CPE-023 Rev. 00; CHRYSLER LP 463 PB 10 01CHG. C; MS-PB-45-2 CHG. V; FORD FLTM BI 103-01; FRTLINER 49-00005 Rev. 6; HES D2003-03 B Rev. 4, HES D2016-99A, HES D6501-03, HES D2021-99C Rev 1, HES D6001-71; NISSAN 54400 NDS00; NISSAN NES M 0007 (2006-N); TSH6524G; PACCAR CMT0033; TOYOTA TSH1552G; CEMS GT-7D; DIN 50021; VOLVO STD 1027.14 |
| Cass/Combined Thermal |
ASTM B368; GM4476M, GM4372M; JIS H 8502-99; TSH6500G; HES D600-1-71, HES D2003-05 B Rev.6, HES 2016-99A, HES D6501-03; TS430-1-4; GES 43226; WSB-MIP83-B1, B2, B3, B4; DVM-0008RG Ver. 3; FRTLINER 49-00039 Rev. A; FORD WSS-M1P83-C1/C2 |
| Altitude |
RTCA-DO-160 C/D/E/F MIL-STD-202 F, MIL-STD-810 C/D/E/F/G; SAE J1211; BELLCORE GR-63 |
| Decompression/Overpressure |
RTCA-DO-160 C/D/E/F |
| Explosion |
RTCA-DO-160 C/D/E/F; MIL-STD-202 F, MIL-STD-810 C/D/E/F/G |
| Sand/Dust |
GM9110P; MIL-STD-202 F, MIL-STD-810 C/D/E/F/G; RTCA-DO-160 C/D/E/F; GMW 3431 Section 4.4.9; IEC 60529; BELLCORE GR-487; SAE J1211, SAE J575 |
| Immersion |
ASTM: D870. D2248; IEC 60529; BELLCORE: GR-49, GR-1209; FLTM BI 104-01; GM4431M;HES D2016-99A, HES D6501-03; TOYOTA TSH1505G |
| Moisture/Rain/Icing |
RTCA-DO-160 C/D/E/F; MIL-STD-202 F, MIL-STD-810 C/D/E/F/G; IEC 60529 |
MATERIAL TESTING
TEST |
TEST METHOD |
| Tensile/Compression Push-Pull to 1,000 lbs. |
ASTM D642 |
| Hardness; Pencil Hardness |
GM9502P, GM9150P, GM 4350M; ASTM: D3359, D3363; HES D2016-99A, HES D6501-03 C Rev. 2; NISSAN NES M 0007 (2006-N) |
| Dime Scrape |
GM9506P |
| Tape Adhesion/X-Scribe & Adhesion |
GM9071P, GM4350M; ASTM: D3359, D1654; NES M 0007 (2006-N); LP 63PB 15 01 CHG A; FLTM BI 104-01, 106-01; HES D2016-99, HES D 6501-03 C Rev. 2; PACCAR CMT0033 Daimler DBL 7399 |
| Taber Abrasion |
MIL-M-13231 (Markings); ASTM D4060; PACCAR CMT0033; GM4350M |
| Chemical Resistance |
RTCA-DO-160 C/D/E/F; MIL-STD-810 C/D/E/F/G; BELLCORE GR-49; HES D6501-03 C Rev. 2, HES D2016; FREIGHTLINER 49-00023; ASTM: D1939, D1308, D5402, GM4350M, GM9500, GM9501, GM9517P, GM9900P; GMN 10033; GMW 14334; NES M0007; PACCAR CMT0033; SAE J1351 |
| Heat Aging |
BELLCORE GR-49 |
| Torque |
BELLCORE GR-49 |
| Colorfast |
GM9033P; HES D2016-99A; NISSAN NES M 0007 (2006-N); FLTM BI 10-1 |
| Drop Test/Impact |
BELLCORE: GR-49, GR-63, GR-1209; JIS K 5400; ASTM: D2794, D5276, D880, D4003, D6179 |
| Film Thickness |
ASTM: D7091, D4138, D1005; HES D6501 |
| Creep |
DAIMLER VOA621-402; PACCAR CMT0033; ASTM D1654; CEM GT-7D |
| Gloss |
ASTM D523 |
| Flexibility |
ASTM: D522, D1737 |
| Cure |
GM9509P |
VIBRATION/SHOCK TESTING
TEST |
TEST METHOD |
| Sine 6500 lbs. |
RTCA-DO-160 C/D/E/F; MIL-STD-202 F, MIL-STD-810 C/D/E/F/G; SAE J1211; GM9110P, GM9123P; GMW 3172; PF9688; FORD 00.00EA-D11-1; DC-10611; BELLCORE: GR-49, GR-63, GR-468, GR-1221, GR-2882; IEC 68-2-27 Part 2; ASTM D5487, IEC-68-2-29 Port 2 |
| Random 4000 lbs. |
| Frequency (1 to 3000) hz. |
| Acceleration 75 g |
| Displacement +/- 1" |
| Temperature (-77 to +177) °C |
| Humidity (20 to 95 %) |
FLAMMABILITY TESTING
TEST |
TEST METHOD |
| Furniture Seating |
CALIFORNIA TB-133 (CAL 133), TB106, TB116, TB117, TB121, TB129, TB603; CPAI-83; CFR1632, CFR1633, FMVSS 302; GM9070P; SAE J369; FED TEST METHOD 5903.1, FED TEST METHOD 5906; FED STD 191A (VERT); FED STD 191 (HORZ); FAA 25.853 APPENDIX F, PART 1(b); FAA 25.853 APPENDIX F PART 1(b)(5); BELLCORE: GR-1209, GR-2882; POWER PLANT No. 3: AC 20-135; ISO: 2685, 3795; JIS D1201; NFPA 260; NFPA 261; UFAC TEST SERIES; ASTM: E1537, D1353; RTCA-DO160F-204; EN1021-2; BS5852 |
| Walls/Tops |
| Mattress |
| Foams |
| Films |
| PCB's |
| Fabrics |
| Composites |
DURABILITY SIMULATION TESTING
TEST |
TEST METHOD |
| Pneumatic / Servo PLC |
BAC 5331; Boeing D6-81926 except section 5.6.9 (Odor and Fungus); Airbus L00716172 |
| Driven Aircraft |
| Boot/ Seal/ Duct |
| Life cycle in Combination with Extreme Temperature |
| Internal and External with Pressure Cycling |
| Screening (ESS) |
| Vibration Profiles with, or without Temperature |
| RH using Customer QTP's Engineering Design Requirements |
PACKAGE TESTING
TEST |
TESTING METHOD |
| Package Testing |
ISTA (International Safe Transit Association) 1A, 1B, 1C, 1D, 1E, 1G, 1H, 2A, 2B, 2C, 2D, 2E, 3A, 3C, 3D, 3E, 3F, 3H, 5B, 6A, 6B, 7A, 7B, 7C, 7D; ASTM: F88, D642, D828, D880, D999, F1140, F1929, F2096, D3078, D4003, D4169, D4332, D4577, D4728, D5265, D5276, D5639, D6055, D6344, D6179, D7386; ISO 11607 |
|
|
